Analisis Daya Dukung Tanah pada Perencanaan Landfill PLTU Suge Belitung

Yayu Hamzah, Satria Agung Wibawa, Yunus Renggana

Abstract


The need for landfill facilities as a place for storing B3 waste in several PLTUs and industries is increasingly becoming a priority. This is because the solid waste piles are generated in large quantities. The problem faced is how to get a construction site with landfill facilities in an area that meets the technical requirements in a timely and safe manner. In planning the PLTU Suge - Belitung landfill facility, the quality of the carrying capacity of the local land must be considered in order to determine a Liner layer construction plan (landfill base layer) and a strong and safe Embankment construction plan. The purpose of this research is to get the results of land carrying capacity quality which can then be used for the design of landfill embankment plans. To measure the carrying capacity of the soil in the field using the Standard Penetration Test / SPT. From the calculation of the carrying capacity based on the SPT data, the result is that the carrying capacity (q b) is between 24.06 – 60.29 tons/m2 (average = 36.51 tons/m2), while the permit carrying capacity (q a) is between 8.02 – 20.10 tonnes/m2 (average = 12.17 tonnes/m2).


Full Text:

PDF

References


Bowles, J. E. (1992). Analisa dan Desain Pondasi. Jakarta: Erlangga.

B. M. Das, (1998), Mekanika Tanah (Prinsip-Prinsip Rekayasa Geoteknis), 1 st. Jakarta: Erlangga

Damanhuri, E. (2008). Diktat Landfilling Limbah. Institut Teknologi Bandung, Versi 2008, 40.

Emeraldi, M., Hendrawati, N., & Sulistyawan, H. (2020). Evaluasi Kinerja Lapisan Landfill pada Area Ash Disposal PT Paiton Operation and Maintenance Indonesia (PT POMI). DISTILAT: Jurnal Teknologi Separasi.

Hardiyatmo, H. C. (2010). Analisis dan Perancangan Fondasi, bagian I. Yogyakarta : Gadjah Mada University Press.

Pasole, D., Patanduk, J., & Wong, I. L. K (2020). Analisis Stabilitas Lereng Disposal Menggunakan Metode Bishop, Janbu, dan Ordinary. Paulus Civil Engineering Journal, 2(3).

Rahmawati, C., Aprilia, S., Saidi, T., and Aulia, T.B., 2021. Mineralogical, Microstructural and Compressive Strength Characterization of Fly Ash as Materials in Geopolymer Cement. Elkawnie, 7 (1), 1–17.

Soemitro, R. A. A., Rendy, T., Rausanfikr, A. (2020). Analisis Penilaian Stabilitas Timbunan Dan Perkuatan Tanah Pada Open Dumping TPA Ngipik Gresik. PORTAL Jurnal Teknik Sipil, 12(2).

Zulfahmi. (2011). Analisis Stabilitas Tanggul, Desain Rawa dan Lereng Tambang untuk Mendukung Operasi Penambangan Batubara di Berau Kalimantan Timur. Jurnal Teknologi Mineral dan Batubara, 7(4): 157-173.




DOI: https://doi.org/10.30601/jtsu.v9i2.4249

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 yayu hamzah

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Teknik Sipil Unaya


Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

© Jurnal Teknik Sipil Unaya : Published by Center for Research and Community Service (LPPM) University of Abulyatama, Aceh, Indonesia. 2019