Perancangan dan Uji Kincir Angin Vertikal Darrieus Tipe-H Dengan Daya 0,31 Hp
Abstract
Wind is one of the renewable energies that can be developed at this time. Wind energy includes energy that can be reproduced through natural processes. Some advantages of renewable energy such as wind are the sources that are continuously obtained from nature without any environmental pollution. Utilization of wind energy sources as a power plant is one of the efforts to meet the electricity needs that are increasingly increasing, both in the industrial and commercial sectors. To develop this potential, we need a tool for converting wind kinetic energy into electrical energy in the form of windmills that work to rotate an electric generator. The results of test showed that at a minimum wind speed of 4.5 m / s, the rotating windmill reached 746 rpm with a generator rotational speed of 4183 rpm, and at a maximum wind speed of 7.3 m / s, the rotating windmill reached 2953 rpm with generator rotational speed reaches 6850 rpm.References
. Alawiy, Affandi, S, Fahrulrozi. (2015), Rekayasa Peningkatan Daya Pembangkit Listrik Tenaga Surya Perumahan Dari Daya 50 Watt Menjadi 1000 Watt.
. Faizal Zul Ardhi. (2011), Rancang Bangun Charge Controller Pembangkit Listrik Tenaga Surya. Universitas Indonesia.
. Rusnia Zaidun & Mad Yamin. (2010), Pengembangan Program Komputer Untuk Pemilihan Kincir Angin Pembangkit Tenaga Listrik Di Pedesaan. Jurnal Keteknikan Pertanian Vol 24, No. 2
. Astu Pudjanarsa & Djati. (2008), Mesin Konversi Energi. Andi, Yogyakarta.
. Daryanto, Y. (2007), Kajian Potensi Angin Untuk Pembangkit Listrik Tenaga Bayu. Balai PPTAGG - UPT-LAGG
. FATEC. (2006), Inverter School Text, Inverter Practical Course, Mitsubishi Electric Corporation, Tokyo, Japan, p.211.
. Hau, Eric. (2006), Wind Turbines: Fundamentals, Technologies, Applications, Economics. Edisi 2. Springer: Berlin, Germany.
. Wiranto Arismunandar. (2004), Pengaruh Sudut Pengarah Aliran Jumla Sudu Radius Berengsel Luar Roda Tunggal Terhadap Kinerja Turbin Kinetik. Jurnal Rekayasa Mesin Vol. 5 No. 2, pp 149-156.
. Mittal, Neeraj. (2001), Investigation of Performance Characteristics of a Novel VAWT. Thesis. Departement of Mechanical Engineering University of Strathclyde.
. N. Efendi, A. K. Jahja dan S. Purnama. (2000), Pembuatan dan Karakterisasi Sel Baterai Sekunder Bahan Superionik. Jurnal Sains Material Indonesia Vol. 1 No. 2, ISSN 1411-1098.
. Sularso, Kiyokatsu Suga. (1997), Dasar Perencanaan Dan Pemilihan Elemen Mesin. Jakarta : Pradnya Paramita.
. Kadir, A.(1987), Energi Sumber Daya, Inovasi, Tenaga Listrik Dan Potensi Ekonomi, Universitas Indonesia Press, Jakarta.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Mahyuddin Mahyuddin, Usman Usman
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Proposed Policy for Journals That Offer Open Access Authors who publish with Jurnal Dedikasi Pendidikan agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).