Pemodelan Beban Pada Struktur Dermaga Multipurpose dengan SAP2000

Authors

DOI:

https://doi.org/10.30601/jtsu.v8i1.2632

Keywords:

Dermaga, Deck on Pile, SAP2000

Abstract

A wharf is a building in a port that is made to moor or close ships that will unload or load goods and unload ferries. This research focuses on modeling the multipurpose wharf structure. The structure of the Deck on Pile wharf is designed to be strong against loads that work either or from areas that include wind, waves, currents, earthquakes and loads due to activities at the pier including ship collision loads (berthing), mooring, loads and vehicles. In this study, trying to analyze on field conditions including information on hydrooceanography, topography, bathymetry, ship design information and pier design. The design of the wharf structure includes the size of the structure, analysis of the strength of structure using the SAP2000 software.

Author Biography

  • Budiono Joko Nugroho, Universitas 17 Agustus 1945 Semarang
    Civil Engineering

References

B. Triatmojo, Perencanaan Pelabuhan.

Yogyakarta: Beta Offset, 2009

British Standards Code of Practice for Maritime Structures, BS 6349 Part 1-7

Guidelines for the Design of Fenders Systems : 2002, PIANC

POLB 2009, Port on Long Beach – wharf design version 4.0

Standar Desain Fasilitas Pelabuhan Regional. 2015. Direktorat Jenderal Perhubungan Laut Kementerian Perhubungan Republik Indonesia

SNI 1726-2019 : Tata cara Perencanaan Ketahanan Gempa untuk struktur Bangunan Gedung dan Non-Gedung

SNI 1727-2019 : Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur lain.

SNI 2847-2019 : Tata Cara Perhitungan Struktur Beton untuk Bangunan Gedung

SNI 8460:2017 : Persyaratan Perancangan Geoteknik

The Overseas Coastal Area Development Institute of Japan. 2002. Technical Standards and Commentaries for Port and Harbour Facilities in Japan.

Apriani, W. (2016). Aplikasi Non Destructive Test Pada Investigasi Keandalan Struktur Struktur Beton. Siklus, 2(2), 95–103.

Rahmawati, C., Zainuddin, Z., Is, S., & Rahim, R. (2018). Comparison between PCI and Box Girder in BridgesPrestressed Concrete Design. Journal of Physics: Conference Series, 1007(1). https://doi.org/10.1088/1742-6596/1007/1/012065

Rahmawati, Cut, & Zainuddin, Z. (2016). Analysing The Route Of PCI Girder-Type Prestressed Concrete Tendons. International Journal of Science and Research (IJSR), 5, 1553–1559.

Tawekall, R. L., Baskara, A. R., & Adriadi, R. (2004). Studi Kehandalan Struktur Anjungan Lepas Pantai Tipe Brace Monopod. Jurnal Teknik Sipil, 11(4), 179–190.

Downloads

Published

2022-01-22

Issue

Vol. 8 No. 1 (2022): Januari 2022

Section

Artikel

License

Proposed Policy for Journals That Offer Open Access Authors who publish with Jurnal Teknik Sipil Unaya agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

How to Cite

Pemodelan Beban Pada Struktur Dermaga Multipurpose dengan SAP2000. (2022). Jurnal Teknik Sipil Unaya, 8(1), 98-107. https://doi.org/10.30601/jtsu.v8i1.2632