Perbandingan Efisiensi Biaya Berdasarkan Perhitungan Struktur Pada Kerangka Atap Menggunakan Baja Ringan dan Baja Berat Dengan Bentang 14.5 M

Authors

  • Faizal Mahmud Program Studi Teknik Sipil, Fakultas Teknik, Universitas Semarang
  • Kukuh Wisnuaji Widiatmoko Program Studi Teknik Sipil, Fakultas Teknik, Universitas Semarang

DOI:

https://doi.org/10.30601/jtsu.v8i2.2807

Keywords:

Light Steel, Conventional Steel, Cost

Abstract

Structural analysis of lightweight steel roof truss and heavy steel roof truss (conventional) spans 14.5 m in terms of cost and work efficiency. The roof truss studied consisted of: truss distance of 1.5 m for mild steel, and 3.75 m for heavy steel, with a slope angle of 20°, the roof covering on both uses sheet metal tile. Modeling and calculating this of level damages (ratio) and roof truss deflection use SAP 2000. The Budget Plan is calculated based on the PUPR Ministerial Regulation 28-2016 using the 2021 unit price. From this research, the results obtained are reduction percentage in price per unit meter2 of light steel roof truss. against heavy steel roof trusses reached 42.84%. Both models (light steel and heavy steel) have ratio and deflection values that are within safe limits, namely the ratio of 0.850114 for mild steel, 0.733239 for heavy steel, and deflection of 0.00054 for mild steel, 0.000075 for heavy steel.

References

Husnah, Husnah dkk. 2019. “Analisis Struktur Rangka Baja Ringan Dan Baja Berat Dengan Aplikasi Bricscad.” Jurnal Teknik Sipil, Vol.5, No.2.

Nasional, Badan Standardisasi. 2002. “SNI 03-1729-2002 Tata Cara Perencanaan Struktur Baja Untuk Bangunan Gedung.”

Nasional, Badan Standardisasi. 2013. “SNI-03-1727-2013 Beban minimum untuk perencanaan bangunan gedung dan struktur lain.”

Nasional, Badan Standardisasi. 2015. “SNI 1729 : 2015 Spesifikasi untuk bangunan gedung baja structural.”

Puri, Wuwuh Asrining. 2013. “Red Bricks And Light Bricks Cost Analysis For Walls And Mild Steel And Wood For Roof Truss (BPN Office Construction Case Study in Mojokerto Regency),” EXTRAPOLASO : Jurnal Teknik Sipil 6(01).

Purwanto, Herri. 2019. “Analisis Efisiensi Konstruksi Rangka Atap Baja Ringan.” Jurnal Deformasi 2(1).

Rahmawati, C., Zainuddin, Z., Is, S., & Rahim, R. (2018). Comparison between PCI and Box Girder in BridgesPrestressed Concrete Design. Journal of Physics: Conference Series, 1007(1). https://doi.org/10.1088/1742-6596/1007/1/012065

Rahmawati, Cut, & Zainuddin, Z. (2016). Analysing The Route Of PCI Girder-Type Prestressed Concrete Tendons. International Journal of Science and Research (IJSR), 5, 1553–1559.

Downloads

Published

2022-07-25

Issue

Vol. 8 No. 2 (2022): Juli 2022

Section

Artikel

License

Proposed Policy for Journals That Offer Open Access Authors who publish with Jurnal Teknik Sipil Unaya agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

How to Cite

Perbandingan Efisiensi Biaya Berdasarkan Perhitungan Struktur Pada Kerangka Atap Menggunakan Baja Ringan dan Baja Berat Dengan Bentang 14.5 M. (2022). Jurnal Teknik Sipil Unaya, 8(2), 147-156. https://doi.org/10.30601/jtsu.v8i2.2807