PERBANDINGAN KADAR ASPAL HASIL EKTRAKSI PADA CAMPURAN ASPAL AC-BC

Penulis

DOI:

https://doi.org/10.30601/jtsu.v3i2.26

Abstrak

The purpose of this study is the comparison of asphalt content of extracted results on the mixture (AC-BC) in accordance with the 2010 revision of the reflex 3. The method used in this study by extraction using a centrifuge extractor on three specimens of test specimens derived from AMP , The asphalt finisher blend of asphalt from the back of the Asphalt Finisher machine and the compaction result taken using Coredrill using a pertaline solvent. This research includes testing of asphalt content before and after Ektraksi. Based on the results of research The percentage of asphalt extraction results from the 6 test objects from each sample obtained the average value of AMP, finisher, and coredrill is 5.60%, 5.58%, 5.49%. Based on the results of the study Comparison of extraction rate by using a solvent of pertalite, from extraction test of Asphalt Mixing Plant asphalt content, Asphalt Finisher, Coredrill asphalt value decreasing from JMF. So that can be made formulation KA Job Mix Formula (JMF) = KA Asphalt Mixing Plant (AMP)> KA when overlaying> KA core. Average: 5.60% ≧ 5.60%> 5.58%> 5.49%. The extraction results are far from the minimum tolerance threshold of the mixture according to Binamarga 2010 2010 revision 3 (three) specifications. Therefore, this study may also support the statement on the Binamarga 2010 revision 3 (three) specification which states core test should not be used for extraction testing.

Referensi

Departemen Pemukiman dan Prasarana Wilayah. Manual Pekerjaan Campuran Beraspal Panas. Jakarta: Departemen Pemukiman dan Prasarana Wilayah direktorat jenderal prasarana wilayah.

Dinas Pekerjaan Umum. (2010). Spesifikasi Umum Binamarga 2010 Revisi 3. Jakarta: Dinas Pekerjaan Umum Bidang Binamarga.

Standar Nasional Indonesia. (2002). Metode Pengujian Kadar Aspal Dari Campuran Beraspal Dengan Cara Sentrifus. SNI 03-6894-2002

Standar Nasional Indonesia. (2002). Tata Cara Pengambilan Contoh Agregat. SNI 03-6889-2002.

Riduwan. (2012). Metode dan Teknik Menyusun Tesis. Cetakan Pertama. Bandung: CV. Alfabeta.

Sukirman. (1999). Perkerasan Jalan Lentur. Jakarta: Nova.

Sukirman. (2003). Aspal Beton Campuran Panas. Jakarta: Granit.

Soehardi. F, Wiyono. S dan Wanim. A. (2014). Kajian Perbandingan Kadar Aspal Hasil Ekstraksi Campuran AC-WC Gradasi Kasar Dengan Cairan Ekstraksi Menggunakan Bensin. Pekanbaru: Program Magister Teknik Sipil Universitas Islam Riau.

Yusnita. (2012). Pengujian Pengaruh Penggunaan Batu Bara sebagai bahan bakar Asphalt Mixing Plant Pada CAmpuran AC-WC Aspal Curah dan Agregat Bangkinang. Pekanbaru: Program Magister Teknik Sipil Universitas Islam Riau.

Unduhan

Diterbitkan

2019-03-02

Terbitan

Vol 3 No 2 (2017): Juli 2017

Bagian

Artikel

Lisensi

Proposed Policy for Journals That Offer Open Access Authors who publish with Jurnal Teknik Sipil Unaya agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Cara Mengutip

PERBANDINGAN KADAR ASPAL HASIL EKTRAKSI PADA CAMPURAN ASPAL AC-BC. (2019). Jurnal Teknik Sipil Unaya, 3(2), 54-63. https://doi.org/10.30601/jtsu.v3i2.26