Desain Ulang Balok dan Kolom Komposit

Penulis

DOI:

https://doi.org/10.30601/jtsu.v5i2.286

Abstrak

The aim of this study is to redesign the beams and columns of reinforced concrete into a composite structure of Women's Empowerment and Child Protection Agency to derive a comparison of strength and efficiency between concrete-steel composite structures and reinforced concrete structures without changing the layout of columns and beams in the initial planning. LRFD (Load Resistance Factor Design) method and SAP2000 ver.14 as a tool were used in this study. The design was based on Indonesian Standard Regulation. The concrete strength (f’c) and steel strength ( were25 MPa and 250 MPa, respectively. In this study, steel profile BJ 37of WF (400 x 400 x 21 x 21) mm was used for beam and WF (400 x 400x 30 x 50) mm with concrete cross section (500 x 500) mm for column. The results of redesign composite structure for three-story building with the designed steel profile is fulfilled the strength requirements. The obtained maximum moment of beam and column are 36789,36 kg.cm and 43942,2 kg.cm, respectively. The used of composite material is 76,925% more expensive than reinforced concrete material.

Referensi

Budi setiawan. (2015). Perencanaan Struktur Baja Komposit Pada Gedung Hotel-Q Denpasar Bali Dengan Sistem Rangka Pemikul Momen : didapat dari : www. Depositoryusu.com

Handi Pramono & rekan. (2006). 17 Aplikasi rekayasa Konstruksi Menggunakan SAP2000 versi 9. Jakarta: PT. Elex Media Komputindo

Handi Pramono dkk. (2007). 12 Tutorial dan Latihan Desain Konstruksi dengan SAP2000 versi 9. Yogyakarta: CV. Andi Offset.

Setiawan, Agus. (2008). Perencanaan Struktur Baja Dengan Metode LRFD (Load Resistance and Factor Design). Jakarta : Erlangga

SNI – 1726. (2012). Tata Cara Perencanaan Ketahanan Gempa Untuk Struktural Gedung dan Non Gedung. Jakarta:BSN

SNI – 1727. (2013). Beban Minimum Untuk Perancangan Bangunan Gedung Dan Struktur Lain. Jakarta : BSN

SNI - 1729. (2015). Spesifikasi Bangunan Baja Structural. Jakarta : BSN

SNI – 7833. (2012). Tata Cara Perencangan Beton Pracetak Dan Beton Prategang Untuk Bangunan Gedung. Jakarta: BSN

SNI 03 - 1729. (2002). Tata Cara Perecanaan Struktur Baja Untuk Bangunan gedung. Jakarta : BSN

T.Segui, W. (2007). Steel Desain (Fourth Edition). Canada: by Nelson.

Unduhan

Diterbitkan

2019-08-09

Terbitan

Vol 5 No 2 (2019): Juli 2019

Bagian

Artikel

Lisensi

Proposed Policy for Journals That Offer Open Access Authors who publish with Jurnal Teknik Sipil Unaya agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Cara Mengutip

Desain Ulang Balok dan Kolom Komposit. (2019). Jurnal Teknik Sipil Unaya, 5(2), 76-86. https://doi.org/10.30601/jtsu.v5i2.286